Digital Cinema Projection

Input cards
In total, there are four input card slots available. Each projector is equipped with a standard set of input cards.

Dual sd/hd – sdi input card
The Dual SD/HD-SDI input card accepts both standarddefinition (SD) and highdefinition (HD) serial-digitalinterface (SDI) signals and enables the user to connect two of either types of signal. Both single-link HD and dual-link HD signals are accepted. This card also has two SD/HD-SDI outputs to enable “loop through” for its respective input.

Analog bnc input card
The Analog BNC input card accepts an analog video signal input over a 5 BNC connector interface. It can accept RGBH&V signals over 5 connectors, as well as component YPbPr signals on the RGB inputs.

Dual link dvi input card
The Dual Link DVI input card has a 15-pin VGA connector for analog signals and a DVI-I connector which can support a single- or dual-link DVI HDCP video signal. The card can simultaneously support a digital signal on the DVI input and an analog signal on the VGA port.

DMX512
This interface card supports the DMX512 communication standard through two 5-pin XLR connectors.

Video Decoder input card
The Video Decoder input card accepts various types of standard definition (SD) video, including CVBS (composite video), S-video, and component. It accepts NTSC 3.58, NTSC 4.4, PAL, PAL-N, PAL-M or SECAM formats. This card has 2 mini-DIN connectors (for S-video signals) and 4 BNC connectors that can be grouped to allow combinations of CVBS, S-Video, YPrPb or RGB video sources.

Twin HDMITM input card
The Twin HDMI input card accepts 2 HDMI inputs and provides 12-bit deep color handling on the input. Additionally, advanced loop-through allows any input on any input card (except HD/SD SDI) card to be looped through to the 2 HDMI outputs on the card.

LCD keypad
This easy-to-use LCD keypad includes:
• Contextual menus provide a fully-featured, intuitive interface; removing the need for a cluttered keypad
• Large, four line LCD display
• Adjustable brightness and timed LCD off mode
• Intuitive keypad design that lights up when features are active – making it user friendly and intuitive
• Active keys are color-coded amber to indicate that selections will result in changes visible to the audience.

Dual-frequency receiver
The dual-frequency (38 kHz and 455 kHz) receivers ensure the projector receives signals at increased distances between the remote and projector, and reduces the affect of interference from lighting.